home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Cream of the Crop 20
/
Cream of the Crop 20 (Terry Blount) (1996).iso
/
bbs
/
ra2t_200.zip
/
RA_2_NEW.ENG
< prev
next >
Wrap
Text File
|
1996-06-07
|
8KB
|
199 lines
RA_2_TAG v2.00
--------------
The new filebase-option of Remote Access 2.50 is fully supported now.
Therefor it is necessary to use the -RA250: parameter !
For the Remote Access 2.02 user the parameter -RA202: is necessary!
If this parameter is not supplied the door will work as it should work for
RA 2.00. So this door can also be used for RA 2.00.
RA_2_TAG v1.07a
---------------
The filebase-option of RA250 is not quit good yet.
An extra parameter -RA250: is added to the program.
If this parameter is present while listing an area the program will read
the area-number and the area-group from the exitinfo.bbs file. The -P:*0 is
not necessary then.
RA_2_TAG v1.07
--------------
Fixed the bug with new file's.
Added a new option by the search options, by keyword-search is the
search-string in a other color in the description.
(I have changed the RA_2_SET file too so please RUN 106-107 first)
RA_2_TAG v1.06a
---------------
Fixed the small bug with the number tagging, now it uses the colors of raconfig.
RA_2_TAG v1.06
--------------
You can replace this NEW version if you are using ra_2_Tag v1.05. else delete
your cfg-file's and replace all the EXE files an run ra_2_set.
A little change for the files.ra file, this file can now be read from the
dir where the set RAOVR= command is set to.
RA_2_TAG v1.05d
---------------
A new logoption is added to the program.
RA_2_TAG v1.05c
---------------
The search option has a small bug this is fixed.
RA_2_TAG v1.05b
---------------
The program is now 100% compatible with ON_OFF_A, this is a new door.
RA_2_TAG v1.05a
---------------
Xfer-priority is now added to the program.
RA_2_PRO v1.05a
---------------
The program does not ask to overwrite a program, it's now overwriting all
files.
RA_2_TAG v1.05
--------------
The door recognized a password with a file, but it did not when the
password was given with the area. This is fixed.
Added the parameter -A:. With this parameter you can force the filenumber-
tagging instead of tagging with the cursorkeys.
Added a downloadoption. In the setupfile you can give the PATH and FILENAME
from the external downloaddoor (like Filedoor).
If you don't fill in this option you are NOT able to download in this door.
The files RA_2_REQ, RA_2_PRO and RA_2_SET have been changed.
I had to this because of a little change in the setupfile.
Don't you forget to run 104-105.EXE FIRST!!!
Do not forget to run ra_2_Set in screen 4 you must add the externe download
door and in screen 5 you must add the (D)ownload and the input letter....
The door swaps now in XMS/EMS of DISK.
Released on 11 JUNE 1995.
RA_2_TAG v1.04
--------------
Official release 1 April 1995.
v1.03 wasn't officially released. Only as a BETA version for users that
registered this door after v1.02.
RA_2_TAG v1.03ß
---------------
Added a new parameter -T:.
With this parameter the USERTIME LEFT is set to 3 minutes before midnight, which
will prevent your system from being unable to run all your daily events,
presuming that you run your daily events around midnight!
Fixed the bug with the descriptions_like_this_one_which_has_no_spacing_in_
between for the word_wrap routine.
Fixed the ratio_files and ratio_kbytes. Users could only download 1 file and
1 Kbyte less, than they had tagged.
Time Slicing routine added for Windows, DesqView, Os/2, NetWare en
DoubleDos. (During startup you will see if the routine is active. Look
sharply, because you can only see it in a flash!)
Added the | (pipeline) in the description as a RETURN.
This option is only active after you activated it in the setup (page 1).
In this case the USE ENTER option in the description has to be active also.
Added a 102to103.EXE file. This one converts the .CFG files from v1.02 to
v1.03. This was done, because there have been some changes in the .CFG files.
An extra line "Use the `S` key to stop searching" is visible for the users
when they use the NEWFILES / KEYWORD / FILENAME search options.
As you could guess, they are now able to stop the search! Lots of users don't
have any knowledge about this options, that's why.
The SETUP has been changed again. It is necessary to run 102t103a.EXE.
This file converts the .CFG files from v1.03 to v1.03a.
New is the possibility to choose your own color(codes) for each textline.
A colorcode looks like this: ^15^ (this is WHITE) or ^7^ (this is GREY).
With the program KLEUREN.EXE you are able to see which color has which code
If a line in the SETUP is shown as CYAN, you can use the colorcodes.
After quiting the SEARCH option, sometimes you did only see the /-\|
characters. The door just skipped 3 characters less then needed.
This is fixed.
When using the SEARCH option, the program stopped strangly enough on an AREA.
I still didn't find the reason for this bug. The program now looks if it
jumped back to the same area more than 10 times. If so it is forced to go to
the next area. 'll keep on trying to find the cause for this bug.
Th colors in the OPTIONS > FILES > LIST FORMAT (CONFIG.RA) where not properly
processed. Fixed.
The number of downloads didn't be properly processed. I fixed this one, but
when the number of downloads is higher than the nummber of ciphers, for
example 123 DL and you are using #02, only the last 2 ciphers "23" are shown.
And again a SETUP change! An extra option to make it possible to place
the user's HANDLE in the description instead of the username.
RA_2_PRO.EXE shall, if you choose for the HANDLE option, load all usernames
and handles into memory so the handle can be placed.
(If the HANDLE-field in your userbase is EMPTY, the user will never find his
requested file in a global search option.)
Added an extra option, which makes it possible to delete characters from
the description. Not really ofcourse, the user just will not see them.
The advantage of this option is that if you enter characters like /\- etc.
and the use ENTER and use | are turned off in the setup, RA_2_TAG handles
the description perfectly well. (Just try it out and be amazed!)
RA_2_PRO.v1.03
--------------
Programm didn't work well with areas over 999. Now it does.
Max. areas are raised to 2500.
RA_2_TAG v1.02
--------------
Added a new parameter -R:
With this users can request new files directly. The
program will search for them itself.
Displaying the area names is going much faster now,
especially for 2400bps users.
Added memory/area information to the program. This is
only visible with the -K: -N: -F: parameters.
RA_2_PRO.v1.02
--------------
Added the text 'Requested by <name>' to the filedescription from a requested
file, so an user can find his file easely.
RA_2_REQ.v1.01
--------------
Programm didn't work properly with areas over 999. Now it does.
RA_2_TAG v1.01
--------------
The -E: parameter is fixed. The extra TAGFILE was read correctly by MTS and
Easytag, but not by Filedoor. Fixed.
The file LIMITS.RA is now read in the current directory. If you are running
a multi-line system and make use of different LIMITS.RA for each line, the
tagger is able to make use of them.
If you are using an empty line between the files, make sure that you run
rafile clean if not then the door wil sometimes display the description from
the previous file.
RA_2_PRO v1.01
--------------
The copy function didn't work for 100%. Sometimes you received the message
that the program was on recordposition, but it wasn't (one to high). As
a result the wrong file was put in the filebase! Fixed.
RA_2_TAG v1.00
--------------
First official release of this door.